Lowering Platform From Platform Control - JLG 1230ES Operation And Safety Manual

From Platform Control Station
Figure 4-8. Lowering Platform From Platform Control
3121221
1. If operating from the platform controls -
Set the lift/drive select switch to lift (1) squeeze the red
trigger switch (2) and push the joystick forward (3) (plat-
form down) and hold until desired elevation is reached or
until platform is fully lowered.Releasing the red trigger switch
or moving the joystick back to it's centered position will stop
the function being operated.
NOTE: To ensure proper orientation of the desired platform func-
tion, match the color (black/white) of the directional arrow
(4), to the lift/lower arrow (5) on the platform control indi-
cator panel.
– JLG Lift –
SECTION 4 - MACHINE OPERATION
4-9