SECTION 4 - MACHINE OPERATION
4.5 OPERATION
Platform/Ground Select Switch
Figure 4-2. Platform/Ground Select Switch
The power selector switch (1) on the Ground Control Station
functions to direct electrical power to the desired control station.
With the switch in the ground position (2), power is supplied to
the emergency stop switch at the ground control station. When
the switch is in the platform position (3), power is supplied to the
emergency stop switch at the platform control station. The switch
should be in the off position (4) when parking the machine over-
night.
4-4
Emergency Stop Switch
Figure 4-3. Ground Control - Emergency Stop Switch
This emergency stop switch (1), when in the on (out) position,
provides electrical power to the ground controls or platform con-
trols, as applicable. In addition, the switch can be used to turn off
power (push the switch IN) to the function controls in the event of
an emergency.
– JLG Lift –
3121221