Ac Inverter Operation (Option) - JLG 1230ES Operation And Safety Manual

SECTION 4 - MACHINE OPERATION

4.10 AC INVERTER OPERATION (OPTION)

Figure 4-12. Location of AC Inverter ON/OFF - Toggle Switch
NOTE: The inverter automatically turns to OFF if it has not
detected any AC loads for 2 hours, or if the loads are so
small the unit cannot detect them, such as a cell phone
charger. To continue inverter operation after an automatic
shut-down, cycle the inverter ON/OFF toggle switch to
OFF then back to ON.
4-14
1. The AC inverter ON/OFF toggle switch (1) is located on the
lower rear panel (2) of the machine.
2. When the toggle switch is set to the ON position this will
allow AC current from the inverter to flow to the AC recepta-
cle box in the platform.
NOTE: Connect devices one at a time to the AC receptacle box.
Do not connect to many high-surge devices at once.
3. To turn off the AC current to the platform AC receptacle box,
set the inverter toggle switch to the OFF position.
NOTE: Further General and Troubleshooting information about
the Inverter/Charger can be found in the manufacturers
Owner's Guide included in the manual storage box
mounted on the machine.
– JLG Lift – 3121221