Pre-Start Inspection - JLG 1230ES Operation And Safety Manual

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2.3

PRE-START INSPECTION

The Pre-Start Inspection should include each of the following:
1. Cleanliness – Check all surfaces for leakage (oil or bat-
tery fluid) or foreign objects. Report any leakage to the
proper maintenance personnel.
2. Structure - Inspect the machine structure for dents,
damage, weld or parent metal cracks or other discrep-
encies.
.
Parent Metal Crack
3. Decals and Placards – Check all for cleanliness and
legibility. Make sure none of the decals and placards are
missing. Make sure all illegible decals and placards are
cleaned or replaced.
2-4
Weld Crack
– JLG Lift –
4. Operators and Safety Manuals – Make sure a copy of
the Operator and Safety Manual is enclosed in the
weather resistant storage container.
5. "Walk-Around" Inspection – Refer to Figure 2-1. on
page 2-8.
6. Battery – Charge as required.
7. Fluid Levels - Be sure to check the hydraulic oil level.
8. Accessories/Attachments - Reference the Operator
and Safety Manual of each attachment or accessory
installed upon the machine for specific inspection, oper-
ation, and maintenance instructions.
9. Function Check – Once the "Walk-Around" Inspection
is complete, perform a functional check of all systems in
an area free of overhead and ground level obstructions.
Refer to Section 4 for more specific instructions on the
operation of each function.
3121221