4.11 TIE DOWN/LIFT LUGS
See Figure 4-14. on page 4-16
Tie Down
When transporting the machine, the platform must be fully low-
ered in the stowed position with the machine securely tied down
to the truck or trailer deck. There are two tie-down/lift lugs located
at the front and rear of the machine for tieing down.
Lifting
Reference Figure 4-14. for proper locations when lifting machine.
The machine can be lifted using a proper spreader bar and straps/
chains only, see Figure 4-14. on page 4-16.
The machine may also be lifted using a fork truck. Lift only with the
platform in the stowed position (pot hole protection bars in the up
position). Adjust the spread of the fork truck lifting tines (1) to
just inside the machines front and rear wheels, see below.
3121221
Figure 4-13. Tie Down and Lift Lug Locations.
– JLG Lift –
SECTION 4 - MACHINE OPERATION
4-15