JLG 1230ES Operation And Safety Manual page 60

SECTION 4 - MACHINE OPERATION
4. Insert the cover bolts into the two disengage holes in the
brake housing (4), see Item 4 in Figure 4-16., Brake - Man-
ual Disengage.
5. Tighten down the cover bolts in the disengage holes and the
brake on that drive motor will disengage.
6. Repeat this procedure on opposite wheel drive. With both
drive motor brakes now disengaged the machine can be
moved manually.
7. After towing is complete, chock wheels and remove cover
bolts from disengage holes.
8. Reinstall cover - before installation check the cover o-ring
seal for damage, replace if necessary.
AFTER THE MACHINE IS TOWED THE DISENGAGE BOLTS MUST BE
REMOVED FROM THE BRAKE DISENGAGE HOLES. THE BRAKES CAN-
NOT BE ENGAGED IF THE DISENGAGE BOLTS ARE LEFT IN THE DIS-
ENGAGE HOLES. THIS WILL CAUSE THE MACHINE TO ROLL WHEN
PARKED ON AN INCLINE.
4-18
Figure 4-16. Brake - Manual Disengage.
– JLG Lift – 3121221