Raising Platform; Raising Platform From Ground Control - JLG 1230ES Operation And Safety Manual

SECTION 4 - MACHINE OPERATION

Raising Platform

1. If the machine is shut down, place the platform/ground select
switch to the desired position (platform or ground).
2. Position both the ground control station and platform control
station emergency stop switches to the on position.
4-6
From Ground Control Station
Figure 4-5. Raising Platform From Ground Control
1. If operating from the ground controls -
Position the lift switch (1) to up and hold until desired eleva-
tion is achieved.
DO NOT OPERATE FROM GROUND CONTROL STATION WITH PERSON-
NEL IN THE PLATFORM EXCEPT IN AN EMERGENCY.
– JLG Lift – 3121221