Table of Contents
Advertisement
Chapter 2 Preparations
1. Installing Internal Optional Devices
5.
Connect the cable of the Power Supply Fan to the connector (FAN3) on the motherboard.
Update the system configuration information by following procedure.
1) Connect the AC cord to the server, then push the power switch to power on.
2) If POST screen is indicated, press F2 key of the keyboard and enter BIOS setup screen.
3) The POWER switch is pressed and the power supply of the server is turned off.
4) Remove the AC cord from the server, and leave the AC power of the server off around 30 seconds.
5) Connect the AC cord to the server again, and push POWER switch in order to power on the server.
Removal
Remove the Power Supply Fan by reversing the installation procedure.
59
Express5800/T110j User's Guide
Advertisement
Table of Contents
