NEC EXP339 User Manual page 85

Chapter 2 Preparations
(c) Using 2.5-inch HDD cage
Connect the cables as shown in the following figure. Install the hard disk drives in order from the left side.

Connecting one to four hard disk drives to the miniSAS connector on the motherboard
Power
supply
Motherboard
miniSAS cable
HDD backplane interface cable
You can use the controller on the motherboard to build a RAID system. For more information, see Chapter 2
(5. RAID System Configuration) in "Maintenance Guide".

Adding one to eight hard disk drives with a RAID controller (N8103-205/206/207/208/210/211).
An optional SAS/SATA cable (K410-340(00)) is required when installing five or more hard disk drives.
Power
supply
Motherboard
4-7
0-3
RAID controller
miniSAS cable
HDD backplane interface cable
FBU cable
* N8103-209 cannot be installed to N8103-205/210/211.
MINISAS_1
BPB_CON1
MINISAS_1
BPB_CON
MINISAS_1
MINISAS_2
BPB_CON1
BPB_CON
Express5800/T110j User's Guide
1. Installing Internal Optional Devices
HDD cage
HDD cage
Flash Backup Unit
(N8103-209)
85