BEC MX-200A User Manual page 88

IPSec Connection Setting
Connection Name: Enter a description for this connection/profile.
Active: Yes to activate the connection.
Interface: Select a WAN interface to establish a tunnel with the remote VPN device. Auto allows
system to automatically initiate a connection via current connected WAN interface.
Remote Gateway IP: The WAN IP address of the remote VPN device. Enter 0.0.0.0 for unknown
remote WAN IP address – only the peer can initiate the tunnel connection.
Local Access Range: Set the IP address or subnet of the local network.
 Single IP: The IP address of the local host, for establishing an IPSec connection between a
security gateway and a host (network-to-host).
 Subnet: The subnet of the local network, for establishing an IPSec tunnel between a pair of
security gateways (network-to-network)
Remote Access Range: Set the IP address or subnet of the remote network.
 Single IP: The IP address of the local host, for establishing an IPSec connection between a
security gateway and a host (network-to-host). If the remote peer is a host, select Single
Address.
 Subnet: The subnet of the local network, for establishing an IPSec tunnel between a pair of
security gateways (network-to-network), if the remote peer is a network, select Subnet.
BEC MX-200A ODU User Manual
Device Configuration
VPN – IPSec
83