Openvpn; Openvpn Server - BEC MX-200A User Manual

Device Configuration
113
VPN – OpenVPN (OpenVPN Server)

OpenVPN

OpenVPN is an open source software application that implements virtual private network (VPN)
techniques for creating secure point-to-point or site-to-site connections in routed or bridged
configurations and remote access facilities. It uses a custom security protocol that utilizes SSL/TLS for
key exchange. OpenVPN can run over User Datagram Protocol (UDP) or Transmission Control
Protocol (TCP) transports, multiplexing created SSL tunnels on a single TCP/UDP port. It is capable
of traversing network address translation (NAT) and firewalls.
OpenVPN allows peers to authenticate each other using a pre-shared secret key, certificates, or
username/password. Preshared secret key is the easiest, with certificate based being the most robust
and feature-rich. It uses the OpenSSL encryption library extensively, allowing OpenVPN to use all the
ciphers available in the OpenSSL package, as well as the SSLv3/TLSv1 protocol, and contains many
security and control features.
It has integrated with OpenVPN package, allowing users to run OpenVPN in server or client mode
from their network routers.

OpenVPN Server

NOTE: Up to 1 profile.
Rule Index: The numeric rule indicator for OpenVPN.
Connection Name: Enter a description for this connection/profile.
Active: Yes to activate this profile.
Local Service Port: Port 1194 is the default assigned port for OpenVPN
Tunnel Network (virtual Interface)
IP Address / Netmask: Enter a virtual IP address and Netmask for this tunnel.
NOTE: The virtual IP addresses cannot be existed or used in both networks.
BEC MX-200A ODU User Manual