BEC MX-200A User Manual page 54

Device Configuration
49
Interface Setup – Internet (4G/LTE)
LTE Antenna Diversity *: When enabled, the auxiliary antenna will be activated. With disabled, only
the primary antenna is receiving and transmitting data. To change it, please click "LTE Antenna
Diversity" link to access to the selection page.
LTE Antenna Diversity
To enable or disable the LTE antenna diversity feature.
* Feature is available with specific cellular module
IP Pass-through Mode: When enabled, MX-200A ODU is in bridge mode that it does not obtain a
WAN IP address; features such as routing capabilities, NAT, firewall, etc., are being disabled. The
client router that is behind the MX-200A ODU now obtains a WAN IP address. When disabled,
MX-200A ODU is in router mode that it handles a WAN IP address and all features become available.
Network Mode: There are 8 options of service standards: "Automatic", "UMTS 3G only", "GSM 2G
Only", "UMTS 3G Preferred", "GSM 2G Preferred", "GSM and UMTS Only", "LTE Only", and "GSM,
UMTS, LTE". If you are not sure which mode to use, you may select Automatic to auto detect the best
mode for you.
PLMN (Public Land Mobile Network) Selection: Either manually enter the information or click Scan
button to scanning all closest base stations in the area.TEL No.: The dial string to make a GPRS /
3G/4G-LTE user internetworking call. It may provide by your mobile service provider.
Dual APN *: Unit can support up to two (2) APNs. Select Single / Dual or a different LTE/3G APN.
 APN (3G): If select LTE/3G with different APN, enter the APN here.
* Feature is available with specific cellular module
APN: An APN is similar to a URL on the WWW, it is what the unit makes a GPRS / UMTS call. The
service provider is able to attach anything to an APN to create a data connection, requirements for
APNs varies between different service providers. Most service providers have an internet portal which
they use to connect to a DHCP Server, thus giving you access to the internet i.e. some 3G operators
use the APN 'internet' for their portal. The default value is "internet".
PDN Type: The IP type for PDN connections. Available types are IPv4, IPv6, and IPv4v6.
Authentication Protocol: Manually specify CHAP (Challenge Handshake Authentication Protocol) or
PAP (Password Authentication Protocol). When using PAP, the password is sent unencrypted, while
CHAP encrypts the password before sending, and also allows for challenges at different periods to
ensure that an intruder has not replaced the client.
Username/Password: Enter the username and password provided by your service provider. The
username and password are case sensitive.
PIN: PIN stands for Personal Identification Number. A PIN code is a numeric value used in certain
systems as a password to gain access, and authenticate. In mobile phones a PIN code locks the SIM
BEC MX-200A ODU User Manual