BEC MX-200A User Manual page 84

network.
 Application: Assign a name that identifies the new QoS application rule. Select from the list
box for quick setup.
Direction: Shows the direction mode of the QoS application
 Protocol:
Select a protocol from the drop-down list
 DSCP Marking:
DSCP Marking allows users to classify the traffic of the application to be executed according to
the DSCP value.
Rate Type: Choose Limited (Maximum) or Guaranteed (Minimum) to specify the date rate is allowed
for this policy.
 Rate: Specify the date rate in Kbps.
 Priority: Set
bandwidth. You can specify which application can have higher priority to acquire the bandwidth.
Its default setting is set to High. You may adjust this setting to fit your policy / application.
Internal IP Address: The IP address values for Local LAN devices you want to give control.

Internal Port: The Port number on the LAN side, it is used to identify an application.
External IP Address: The IP address on remote / WAN side.
 External Port: The Port number on the remote / WAN side.
Click Save to apply settings.
To Remove a Policy: Simply select the Index then hit the Delete button to remove from the list.
BEC MX-200A ODU User Manual
Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte.
the priority given to each policy/application.
Device Configuration
Advanced Setup – QoS
Specify the priority for the use of
79