Openvpn Client - BEC MX-200A User Manual

Device Configuration
115
VPN – OpenVPN (OpenVPN Client)

OpenVPN Client

OpenVPN client must match the VPN information / settings with the OpenVPN Server.
NOTE: Up to 4 tunnels supported.
Rule Index: The numeric rule indicator for OpenVPN. Maximum up to 4 profile/tunnels
Connection Name: Enter a description for this connection/profile.
Active: Yes to activate this profile.
Server IP Address or Domain Name: Enter OpenVPN Server's WAN IP address or Domain name.
Service Port: Port 1194 is the official assigned port number for OpenVPN
Active as Default Route: Choose Yes to let the OpenVPN tunnel/connection be the default route for
traffic, under this circumstance, all outgoing packets will be forwarded to this tunnel and routed to the
next hop.
Remote Subnet
IP Address / Netmask: Enter the LAN network IP address and Netmask of the OpenVPN Server.
Protocol: OpenVPN can run over either UDP or TCP transports. Select the protocol.
Local Certificate / Trusted CA Index: OpenVPN mutually authenticate the server and client based
on certificates and CA. Select a certificate and CA.
To import certificates and CAs, go to Maintenance >> Certificate Management to upload files.
Otherwise, select Default certificate and CA.
Cryptographic Suite
Cipher: OpenVPN uses all the ciphers available in the OpenSSL package to encrypt both the data
and channels. Select an encryption method.
BEC MX-200A ODU User Manual