Table of Contents
Advertisement
Device Configuration
50
Interface Setup – Internet (4G/LTE)
card until you enter the correct code. If you enter the PIN code incorrectly into the phone 3 times in a
row, then the SIM card will be blocked and you will require a PUK code from your network/service
provider.
Connection: Default set to Always on to keep an always-on 3G/4G-LTE connection.
Keep Alive / IP: Select Yes to keep the 3G/4G-LTE connection always on. Manually enter the Keep
Alive IP Address to be used for ping operation to check if the connection is still on.
Default Route: Select Yes to use this interface as default route interface.
NAT: Select this option to Disabled/Enable the NAT (Network Address Translation) function. Enable
NAT to grant multiples devices in LAN to access to the Internet through a single WAN IP.
When router's Internet configuration is finished successfully, you can go to the Status to check
connection information.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific
headers) an IP attempts to send through the interface. 0 means to use default MTU size, 1500byte.
Click Save to apply settings.
BEC MX-200A ODU User Manual
Advertisement
Table of Contents
