Checking The Compatibility Of Vehicle And Accessories - NavLinkz r.LiNK RL4-LR17 Manual

1.2.

Checking the compatibility of vehicle and accessories

Requirements
Brand Compatible vehicles
Range Rover since model year 2018
Range Rover Sport since model year 2018
Land Rover Range Rover Velar since model year 2017
Range Rover Evoque since model year 2020
Discovery 5
XE since model year 2019
I-Pace since model year 2019
Jaguar
Limitations
Video only
Factory rear-view camera
After market front camera
PDC and guide lines
Video input signal
Version 10.08.2020
All manuals and user guides at all-guides.com
The interface inserts ONLY video signals into the infotainment. For
inserting Audio signals either the possibly existing factory audio-AUX-
input or a FM-modulator can be used. If 2 audio sources shall be
connected to the infotainment, an additional electronic is necessary to
switch them.
Automatically switching-back from inserted video to factory rear-view
camera is only possible while the reverse gear is engaged. To delay the
switch-back an additional electronic part is required.
The front camera will automatically be switched for 10 seconds after
disengaging the reverse gear. A manually front camera switching is
possible by external keypad.
If the video interface does not receive the required information from
the vehicle CAN-bus, neither guide-lines nor optical PDC display will be
supported.
only NTSC compatible
HW:CAM(V98)/(V31/ZK)
Compatible systems
Incontrol Touch Pro Duo
with 10.2 inch 24:9 monitor (glossy)
and climate control panel via 2nd
touch monitor
RL4-LR17