Sharp DX-2500N Operation Manual page 77

3
4
• When removing and attaching the far paper size guide, take care not to hit the front cover of the machine.
• Adjust both the front and back guides. If only one guide is adjusted, skewed feeding and misfeeds may result.
Set the paper type and paper size.
For the procedure for configuring these settings, see
5
An incorrect paper type or paper size setting may cause automatic selection of the wrong type or size of paper, and result in
a misfeed or otherwise prevent printing.
Model
Paper sizes
Paper capacity
Dimensions
Weight
MX-DE20
Tray 2: A3 (11" × 17") to A5R (5-1/2" × 8-1/2"R)
Tray 3: A4 (8-1/2" × 11")
Tray 4: A4 (8-1/2" × 11")
Tray 2: 500
Tray 3: 1150
Tray 4: 850
583 mm (W) × 577 mm (D) × 382 mm (H) (22-61/64" (W) × 22-46/64" (D) × 15-1/64" (H))
Approx. 30 kg (66.2 lbs.)
BEFORE USING THE MACHINE
Push in the paper guide so that it locks
into place.
Push the paper size guide in until the hook at the bottom locks
into place. (You will hear a "click" when the hook locks.) Move
the paper size guide slightly to verify that it has locked into
place.
Repeat steps 1 to 3 to adjust the far
paper guide to the paper size to be used.
Be sure to adjust the far paper guide to the same size as the
near paper guide.
"Paper Tray Settings" (page 7-13) in the System Settings.
1-36
Contents