Sharp DX-2500N Operation Manual page 39

HOW TO USE THIS MANUAL
Click a button below to move to the page that you wish to view.
(5)
(1) Return to top page button
If an operation does not proceed as expected, click this
button to start over again.
(2) Back one page button
Displays the previous page.
(3) Forward one page button
Displays the next page.
(4) Return to previously displayed page button
Displays the page that was displayed before the current
page.
• If a button does not appear, refer to Adobe Reader Help to display the button.
• Caution when printing
If all pages are printed, the menu pages of the "I want to..." menu will also be printed. To print only the pages that contain
the explanation of a function, specify a page range.
(1) (2) (3) (4)
BEFORE USING THE MACHINE
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1) Automatic document feeder (Reversing single pass
feeder)*
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
PLACING THE ORIGINAL (page 1-40)
(2) Front cover
Open this cover to switch the main power switch to "On"
or "Off" or to replace a toner cartridge.
TURNING THE POWER ON AND OFF (page 1-15)
REPLACING THE TONER CARTRIDGES (page
1-66)
(3) Output tray (centre tray)
Output is delivered to this tray.
* Peripheral device.
BEFORE USING THE MACHINE
(1) (2) (3) (4) (5)
When a Document cover is
installed
When a finisher is installed
(4) Operation panel
This is used to select functions and enter the number of
copies.
OPERATION PANEL (page 1-8)
(5) Document cover*
This holds down the original.
(6) Finisher* (DX-2500N only)
This can be used to staple output. A punch module can
also be installed to punch holes in output.
FINISHER (page 1-46)
1-3
Contents
(5) Adobe Reader Help button
Opens Adobe Reader Help.
(6) Contents button
Displays the contents of each chapter.
For example, if the current page is a page in the body of
the printer chapter, this button shows the contents of the
printer chapter.
ii
(6)
(6)