Sharp DX-2500N Operation Manual page 538

Specifying the original scan size (by numerical values)
When scanning a non-standard size original such as a card, follow these steps to specify the original size. The width can
be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8").
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Original] key.
The automatically detected original size appears to the right of the [Original] key.
+
IMAGE SETTINGS
Scan/Original
Scan Size
Auto
2
2-Sided 2-Sided
Booklet Tablet
Scan/Original
Auto A4
Manual
A5
3
A5R
B5
216x340 216x343
Size Input
Scan/Original
Size Input
4
You can also touch the
(page 5-53)
OK
100% Send Size
Auto
A4
Image Orientation
OK
B5R B4
AB
A4 A3
Inch
A4R Long Size
(1), (2) (3)
OK
Cancel OK
X 420
(50 432)
mm
Y
297
(50 297)
mm
keys to change the number.
Touch the [Scan Size] key.
Touch the [Size Input] key.
Enter the scan size (original size).
(1) Touch the X (width) numeric value display
key and enter the width.
(2) Touch the Y (height) numeric value display
key and enter the height.
(3) Touch the [OK] key.
Touch the [OK] key next to the [Cancel] key to complete
the setting and return to the screen of step 3.
5-57
SCANNER/INTERNET FAX
Contents