Enlarging/Reducing The Length And Width Separately (Xy Zoom) - Sharp DX-2500N Operation Manual

ENLARGING/REDUCING THE LENGTH AND WIDTH
SEPARATELY (XY Zoom)
The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately.
Both the horizontal and vertical ratios can be set from 25% to 400% in increments of 1%.
Touch the [Copy Ratio] key in the base screen of copy mode and then follow the steps below.
When 50% is selected for the horizontal ratio and 70% is selected for the vertical ratio
Copy Ratio
B4 B5
70%
A3 A4
B5 A5
81%
B4 A4
1
A4 B5
86%
A3 B4
Auto Image XY Zoom
(2)
Copy Ratio
XY Zoom
50%
64%
77%
2
(A) (B)
• To quickly select a ratio, touch a preset ratio key (A) to select a ratio close to the desired ratio and then use the
zoom keys (B) for fine adjustment.
• As an alternative to touching the
change the value with the numeric keys.
When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both 25% to 200%.
To cancel an XY zoom setting...
To cancel an XY Zoom setting, touch the [XY Zoom] key or the [Cancel] key.
Original
OK
100
B5 A4
%
115%
B4 A3
1
A5 B5 2
Zoom 122%
A4 B4
B5 B4
141%
A4 A3
100%
(1), (3) (4)
OK
Cancel
X 50
%
70
Y
129%
%
Zoom
200%
400%
100%
(A)
keys, you can also directly touch the numeric value display key and
Copy
Touch the [XY Zoom] key.
Set the horizontal and vertical ratios.
(1) Touch the [X] key.
The [X] key will be highlighted and the horizontal ratio can
be set.
(2) Touch one of the preset ratio keys (A) and the
zoom keys (B) to set the X (horizontal) ratio.
(A) A touched preset ratio key will not be highlighted.
(B) The zoom keys can be touched to set the ratio from
25% to 400% in increments of 1%.
(3) Touch the [Y] key and set the Y (vertical)
ratio in the same way as the [X] key.
(4) Touch the [OK] key.
After touching the [OK] key, make sure that a paper size
suitable for the ratio is selected.
2-28
COPIER
Contents