Table of Contents
Advertisement
Auto off function
"Auto Off"
While the setting is set to "On", this unit
automatically enters standby mode for saving
energy, if no sound output without operation such
as pressing buttons, etc. for approx. 20 minutes.
• The factory default is "On". To disable this
function, select "Off".
Note
• The setting is stored even if the power is turned
off and on.
• "Auto Off" is displayed 3 minutes before this unit
is turned off.
Auto dimming function
"Auto DIMMER"
While the setting is set to "On", this unit temporarily
adjust the brightness of the display, power indicator,
etc., if no sound output without operation such as
pressing buttons, etc. for approx. 20 minutes.
• The factory default is "On".
• "Auto Off" has priority over auto dimming and this
unit turns off automatically when "Auto Off" is set
to "On".
Sets dimming function steps
"DIMMER Steps"
You can turn off the power indicator in addition to
adjusting the brightness of this unit as 4 steps by
pressing [DIMMER] when "DIMMER Steps" is set to
"5 (including Blackout)".
• The factory default is "4".
• This unit is not turned off even when the
brightness is turned off.
• When the brightness is turned off, the power
indicator (red) is also turned off in standby mode.
• When [DIMMER] works for the connected
Technics devices, dimming step may not match
between this unit and the connected devices. Set
to "4" or adjust the steps for each.
95
(Continued)
Advertisement
Chapters
Table of Contents
