Technics SL-G700M Operating Instructions Manual page 98

Update via Internet
■
Preparation
• Connect this unit to the network. (⇒ 30)
 Make sure that the network is connected to the
Internet.
1 Press [NWP].
2 Press [SETUP].
3 Press [ ], [ ] repeatedly to select "F/W
Update" and then press [OK].
4 Press [ ], [ ] to select "Internet" and
then press [OK].
5 Press [ ], [ ] to select "Yes" and then
press [OK].
• The progress is displayed as "Updating
while updating. (" " stands for a number.)
• When the update has finished successfully,
"Success" is displayed.
6 Press [
off and on.
Note
• Downloading may take longer depending on the
internet connection environment, etc.
• Firmware updating may automatically start after
the network setting is complete (⇒ 30).
Update via USB flash memory
■
Preparation
• Download the latest firmware on the USB flash
memory. For details, refer to the following
website.
www.technics.com/support/firmware/
1 Connect the USB flash memory with
new firmware to the USB-A terminal
(USB-A Front) on the front of this unit.
• The USB-A terminal (USB-A Rear) on the rear of
this unit is not available for firmware updating
by USB flash memory.
2 Press [NWP].
3 Press [SETUP].
4 Press [ ], [ ] repeatedly to select "F/W
Update" and then press [OK].
5 Press [ ], [ ] to select "USB-A Front"
and then press [OK].
] on the unit to turn this unit
98
%"
(Continued)