Table of Contents
Advertisement
Remote control
The remote control does not work properly.
• Press [NWP] first to operate this unit. (The remote
control works only for the devices supporting
system control function when pressing [AMP].)
• The batteries are depleted or inserted incorrectly.
(⇒ 24)
• To avoid interference, please do not put any
objects in front of signal sensor. (⇒ 18)
• If the remote control mode of the remote control
differs from that of this unit, match the mode of
the remote control to the mode of this unit. (⇒ 24)
Messages
Auto Off
The unit has been left unused for about 20 minutes
and will shut down within a minute. (⇒ 95) Press
any button to cancel it.
Checking Device
The unit is checking the connected USB device.
• After this display has disappeared, start operating.
Connect to Network
Connect this unit to the network and then wait for
the start of the Firmware Update via Internet.
(⇒ 98)
Download Fail
The firmware download has failed.
The network is not connected to the internet.
• Press any button to exit. Please try again later.
• The server cannot be found. Press any button to
exit. Make sure that the network is connected to
the internet.
Empty
The selected folder is empty.
• Move tracks into the folder and retry the
operation.
The server is not found on the network.
• Check to see if the server is connected to the same
network as this unit, and retry the connection to
this unit. (⇒ 30)
No station, track, etc. is registered to the favourite
list or playlist.
• Add a station or track to the list. (⇒ 49, 103)
Error
Incorrect operation is performed.
• Read the instructions and try again.
Fail
Network connection is not complete.
• Try the setting again. (⇒ 30)
118
(Continued)
Advertisement
Chapters
Table of Contents
