Wireless Lan Connection - Technics SL-G700M Operating Instructions Manual

Wireless LAN connection

■
Preparation
Disconnect the AC mains lead.
Disconnect the LAN cable.
Place this unit as close to the wireless router as
possible.
Point up the antenna on the rear of this unit as
shown in the figure.
Connect the AC mains lead to this unit. (⇒ 29)
Note
• The setting will be cancelled after the set time
limit. In that case, try the setting again.
• To cancel this setting in the middle, press [
turn the unit to standby mode.
• When the connection is established, "
displayed. (⇒ 37)
Network setting for the first time using
the app
1 Press [NWP
• "Wi-Fi Setup" is displayed.
2 Press [ ], [ ] to select "Yes" and press
[OK].
• "Setting" is displayed.
(Using Google Home app)
3 Open the Google Home app and follow
the on-screen instructions. (⇒ 37)
(Using Apple Home app)
3 Open Apple Home app and follow
the on-screen instructions to set up a
connection. (⇒ 37)
] to turn this unit on.
33
] or
" is
(Continued)