Setting The Analogue Audio Output "A.output Level; Adjusts The Phase And Amplitude Shift Of Analogue Audio Output "Coherent Processing - Technics SL-G700M Operating Instructions Manual

Setting the analogue audio output
"A.Output Level"
You can set the analogue audio output level is fixed
or adjustable when changing the volume with this
unit. (⇒ 27)
• The factory default is "Fixed".
• When you connect a power amplifier, etc., set
"A.Output Level" to "Variable" for volume control
with this unit. When you connect a pre-amplifier,
etc., set "A.Output Level" to "Fixed" for volume
control with the connected device.
• The factory default of the analogue audio output
level is "-60.0 dB" when setting to "Variable".
• -- dB (min), -99.0 dB to 0 dB (max)
• Set "Analog Output" to "On" to use this function.
Adjusts the phase and amplitude
shift of analogue audio output
"Coherent Processing"
Adjusts the phase and amplitude shift when
converting digital signal to analogue audio output
signal.
• The factory default is "On".
• Set "Analog Output" to "On" to use this function.
• This function is available for audio signal of
192 kHz or less.
• This function is not available for DSD signal
including Super Audio CD or while the headphones
are connected.
*
1: DSD signal is available which is input to this unit
from USB device or network device (DMP/DMR)
only when "DSD Native" is set to "Off".
92
*
1
(Continued)