Technics SL-G700M Operating Instructions Manual page 119

Firmware update is available
The firmware (free of charge) for this unit is
available.
Press [NWP].
Press [OK].
Press [ ], [ ] to select "Yes" and then press
[OK].
• The progress is displayed as "Updating
while updating. (" " stands for a number.)
• Do not disconnect the AC mains lead or turn
this unit to standby while updating. (⇒ 97)
• When the update has finished successfully,
"Success" is displayed.
Press [
on.
• For the update information, refer to the following
website.
www.technics.com/support/firmware/
"F " (" " stands for a number.)
An abnormality has occurred. (If this unit detects an
abnormality, the protection circuit is activated, and
the power may be turned off automatically.)
• Is this unit placed in an extremely hot place?
• Wait a few seconds and then turn the unit on
again. (The protection circuit will be deactivated.)
If the problem persists, write down the displayed
number, disconnect the AC mains lead and consult
your dealer.
Load Fail
The firmware cannot be found on the USB flash
memory.
• Download the latest firmware on the USB flash
memory and try again. (⇒ 98)
No Device
No USB device is connected.
• Connect the USB device to be played. (⇒ 47)
USB device is not playable.
• Check to see if the file system of USB device is
playable. (⇒ 129)
No Disc
No CD is inserted. Inserted CD-R, etc. have no audio
track.
• Insert the disc to be played (⇒ 43).
No Layer
No available layer to be played back.
• Insert Hybrid Super Audio CD disc which has a CD
layer and Super Audio CD layer.
No Network Available
This unit is not connected to the network.
• Check the network connection. (⇒ 30)
No Play
The disc cannot be played back.
• Insert the disc to be played (⇒ 122).
] on the unit to turn this unit off and
119
%"
(Continued)