Decoding Mqa Source - Technics SL-G700M Operating Instructions Manual

Settings

Decoding MQA source

This unit includes the MQA (Master Quality
Authenticated) technology, which enables
playback of MQA audio files and streams,
delivering the sound of the original master
recording. This unit is a CD player that can
recognise an MQA-CD. The built-in MQA
decoder will restore the high-resolution
signal heard in the studio and confirm it,
using the authentication signature.
To deliver the master quality audio of MQA,
MQA decoding function needs to be set to
"On". Switch the MQA decoding function to
"On" or "Off" in the following steps.
• The factory default is "On".
• "MQA" is displayed while MQA content is
played back. Audio setting status such as
MQA decoding status, etc. is displayed by
pressing [INFO] while playing back MQA
audio file.
1 Press [NWP].
2 Press [MQA] to switch the MQA
decoding function to "On".
• "MQA Decoding : On" is displayed.
3 Play back the MQA file.
• "
• When only using the analogue audio, set "Digital
Output" to "Off" for better sound quality of MQA
content playback.
• You can also set "MQA Decoding" to "On" from
the setup menu.
Press [NWP].
Press [SETUP].
Press [
Decoding" and then press [OK].
Press [
[OK].
• When only using the analogue audio, set "Digital
Output" to "Off" for better sound quality of MQA
content playback.
" is displayed.
], [ ] repeatedly to select "MQA
], [ ] to select "On" and then press
100
(Continued)