Recommended Setting For Each Output And Function Of The Connected Device - Technics SL-G700M Operating Instructions Manual

Note
• "MQA" or "MQA Studio" indicates that the unit
is decoding and playing an MQA stream or file,
and denotes provenance to ensure that the sound
is identical to that of the source material. "MQA
Studio" indicates it is playing an MQA Studio file,
which has either been approved in the studio by
the artist/producer or has been verified by the
copyright owner.
"OFS" is displayed for MQA rendering function.
For details, visit:
https://www.mqa.co.uk/
• MQA files or streams may not be decoded to
deliver the master quality audio depending on the
setting of the connected digital audio device. For
details, refer to the operating instructions of the
connected device. For information of Technics
devices, refer to the following website.
www.technics.com/support/
• When MQA audio file cannot be played back
properly, set "DSD Native" to "Off". The
performance may be improved. (⇒ 91)
• Specifications are subject to change without
notice.
Recommended setting for each
output and function of the
connected device
■
MQA Core Decorder
Digital output
(COAX/OPT)
Analogue output
(BALANCED/
UNBALANCED)
■
MQA Renderer
Digital output
(COAX/OPT)
Analogue output
(BALANCED/
UNBALANCED)
"Digital Output" is set to
"On".
"MQA Decoding" is set to
"Off".
"Digital Output" is set to
"Off".
"MQA Decoding" is set to
"On".
"Digital Output" is set to
"On".
"MQA Decoding" is set to
"On".
"Digital Output" is set to
"Off".
"MQA Decoding" is set to
"On".
101
(Continued)