Technics SL-G700M Operating Instructions Manual page 116

Playback does not start.
The sound is interrupted.
• The content may not be played back properly
depending on the network condition.
• If using the 2.4 GHz band on the wireless router,
simultaneous use with other 2.4 GHz devices, such
as microwaves, cordless telephones, etc., may
result in connection interruptions. Increase the
distance between this unit and these devices.
 If your wireless router supports 5 GHz band, try
using the 5 GHz band.
• Do not place this system inside a metal cabinet, for
it might block the Wi-Fi signal.
• If the playback stops, check the playback status on
the device.
• Place this system closer to the wireless router.
• Check the Wi-Fi signal strength using "Signal
Level" and adjust location of this unit and the
wireless router. (⇒ 96)
• If several wireless devices are simultaneously using
the same wireless network as this unit, try turning
off the other devices or reducing their wireless
network usage.
• Reconnect the devices to the network.
• Turn the wireless router off and then on.
• With some iOS and iTunes versions, it may not
be possible to restart the AirPlay playback if the
selector is changed (e.g. "CD") or this unit is in
standby mode, during the AirPlay playback. In this
case, select a different device from the AirPlay icon
of the Music App or iTunes and then re-select this
system as the output speakers. (⇒ 86)
• If the above solutions do not solve the problem,
make a wired LAN connection for all connected
devices which have LAN terminal (this unit,
Network Attached Storage, media server, etc.).
(⇒ 32)
The media server and its contents are not
displayed.
• The connected media server and its contents
may not be displayed properly depending on its
condition (e.g. soon after adding the contents to
the server, etc.). Try again later. For details, refer to
the operating instructions of the media server.
Cannot find music files stored on the PC.
• When you play back music files over a network,
those that are not registered to its network
server are not displayed. For details, refer to the
operating instructions for your server.
Cannot display the information properly.
• Track names, etc. may not be displayed properly.
The content in PC, application, etc., cannot be
played back.
• Depending on PC, application, etc., the content
may not be played back even though the sampling
frequency is supported. Check the PC, application,
etc., to play back properly.
116
(Continued)