Auto Cue Function - Technics SL-PD947 Operating Instructions Manual

2.3
I I I I
7
r 1
_s
©
, /
Auto cue function
The auto cue function allows the unit to wait in a standby condition
at the beginning of each track so as to start play right when you are
ready.
When each track finishes playing, the unit skips to the beginning of
the next track and switches to the play standby mode.
1
Press AUTO CUE.
The auto cue indicator will illuminate.
(1)' (2]D <E3) (4) (_5)' I I'-_ I"_ _ /7 • /7 t-_ l
IT " " " _' I-I L/_ L-I L'I" L' L'.sEc
I
Auto cue indicator
2
Press PLAY.
(Also availabte trom the remote control.)
The changer switches to the play standby mode at the begin-
ning of the track.
The pause indicator will illuminate, and the play indicator will
flash.
• ' ' I /-I • /_1 sE/
I
/ /
Pause indicator Play indicator
3
Press PLAY again to start play.
(Also available from the remote control.)
Press PLAY at the beginning of each track.
The auto cue function may not cause the unit to wait exactly at the
beginning of a track if the track begins with a very soft passage or
if there is a tot of background noise.
To cancel auto cue
Press AUTO CUE.
AUTO CUE
The auto cue indicator will go out.
27