Technics SL-G700M Operating Instructions Manual page 112

No sound.
• Check the volume of the connected device. Check
the volume of this unit if "A.Output Level" is set to
"Variable".
• Check to see if the cable connections to the input
and output terminals are incorrect. If this is the
case, turn this unit to standby and reconnect the
cables correctly.
• Check to see if the correct input source is selected.
• Insert the plugs of the cables to be connected all
the way in.
• Playback of multi-channel content is not
supported.
• The digital audio input terminal of this unit can
only detect linear PCM signals. For details, refer to
the operating instructions of the device.
• Audio signal of Super Audio CD and Super Audio
CD layer of Hybrid Super Audio CD cannot be
output from the digital audio output terminal
of this unit. Connect the device to the analogue
audio output terminal.
• Not all MQA files may be played back. Set MQA
decoding function to "Off" when is not played
back properly. (⇒ 100)
• When MQA audio file cannot be played back
properly, set "DSD Native" to "Off". The
performance may be improved. (⇒ 91)
• Not all DSD signal may be played back. Set "DSD
Native" to "Off" when is not played back properly.
(⇒ 91)
• Check if "Digital Output" or "Analog Output" is set
to "On". (⇒ 91)
Playback does not start.
• Depending on your environment or connected
devices, it may take some time.
• Check to see if the format of the file is supported.
For supported formats, refer to "Format". (⇒ 131)
The unit turns to standby mode automatically.
• Is the auto off function turned on? (⇒ 95)
• This unit may turn to standby mode simultaneously
with the connected device with the system control
function. (⇒ 106)
The settings are reset to the factory defaults.
• Updating the firmware may reset the settings.
The system control function is not working.
• Use the system connection cable supplied with the
connected device.
• Connect the system connection cable to the
system terminals (CONTROL). (⇒ 105)
• Set "A.Output Level" to "Fixed" (⇒ 105)
• Connect Technics device supporting system
control function (Stereo Integrated Amplifier,
etc.) to this unit. For details, refer to the following
website.
www.technics.com/support/
112
(Continued)