Operations
Using USB device
You can connect a USB device to the unit
and play back music stored on the USB
device.
• Refer to "USB" (⇒ 123) for information
about the USB device this unit can play
back.
1 Connect a USB device to the USB-A
terminal (USB-A Front/USB-A Rear) on
the front/rear of this unit.
2 Press [NWP].
3 Press [>INPUT<] repeatedly to select
"USB-A Front"/"USB-A Rear".
• You can also select the input source by turning
the multi control knob after pressing [INPUT] on
the unit.
• The folder/content selection screen will be
displayed.
4 Press [ ], [ ] to select an item and then
press [OK].
• Repeat this step to make further selections.
• Press [RETURN] to return to the previous folder.
Using a USB HDD
When using a USB HDD with this unit, connect a
USB HDD to the USB-A terminal (USB-A Rear) on
the rear of this unit and switch the input source to
"USB-A Rear".
Note
• Do not connect a USB HDD to the USB-A terminal
(USB-A Front) on the front of this unit.
47
USB device
(Continued)