Network Standby "Standby Mode; Network Settings "Network; Changing The Character Encoding "E Asian Character - Technics SL-G700M Operating Instructions Manual

Network standby
"Standby Mode"
When this function is set to "On", then this unit
automatically turns on in the following cases.
 When a Bluetooth
this unit from a paired Bluetooth
 When playback operations are performed on this
unit from a device connected to the network.
• The factory default is "On". To disable this
function, select "Off".
Network settings
"Network"
Wi-Fi setting
"Wi-Fi Menu"
The wireless LAN function can be enabled or
disabled.
• The factory default is "On".
Displaying the network icon
"Network Indicator"
Set to "Off" to turn the network icon (Wired LAN /
Wireless LAN) off from the display.
• The factory default is "On".
Wi-Fi signal strength
"Signal Level"
To check the Wi-Fi signal strength where this system
is located.
• The signal strength is shown as 3 (max) - 2 - 1. If
the indicator shows "2" or "1", change the position
or angle of your wireless router or this system, and
see if the connection improves.
• If "0" is displayed, this system cannot establish a
link with the wireless router.
Changing the character encoding
"E Asian Character"
You can change the character encoding of track
names, artist names and other information when
they are not displayed as they should be.
Type 1(日本):
Priority is given to Japanese. (default)
Type 2(简体字):
Priority is given to Chinese (Simplified).
connection is established to
®
96
device.
®
(Continued)