Packing List; Selecting A Location; Installing And Leveling Casters - Fisher Scientific Isotemp Plus 13-986-120A Manual

Chromatography and general purpose laboratory refrigerator with alarm version controls
Table of Contents

Advertisement

Note
The refrigerator must be level in order to
provide adequate condensation
drainage as well as proper door align-
ment and operation. The refrigerator
should be in its final operating location
and set so that it is firmly positioned on
the floor.

Packing List

The following items are packed in the envelope located
inside the refrigerator chamber. If any of the following
items are not present, report the missing item to your
local Fisher representative.
1.
Warranty Card
2.
Instruction Manual
3.
Door Lock Key
4.
Power Switch Key
5.
Chart Recorder Instructions (Catalog No.'s with
"R")

Selecting a Location

Choose a location for the refrigerator that will provide at
least three inches of clearance between the cabinet
and any adjacent vertical surface at the sides and rear.
Appropriate electrical power must be available. Locate
the refrigerator within 6 feet of the power outlet so that no
extension cord is required.

Installing and Leveling Casters

Isotemp Plus refrigerators and freezers come with four
casters, which thread into the base of the unit, one in
each corner. Use the wrench provided to thread the cast-
ers completely into the base of the unit. Back the casters
in or out until the unit is level and resting on all four cast-
ers. See Figure 1.
Refrigerator
Base
Thread casters directly
into base at four corners.
Figure 1
U
I
NPACKING AND
NSTALLATION
Tighten using
wrench provided.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Isotemp plus 13-986-120raIsotemp plus 13-986-121aIsotemp plus 13-986-121raIsotemp plus 13-986-122aIsotemp plus 13-986-122raIsotemp plus 13-986-123a ... Show all

Table of Contents