Installation And Operation - Aerotech ANT130LZ Series Hardware Manual

Single-axis z direct-drive nanopositioning stage
Hide thumbs Also See for ANT130LZ Series:
Table of Contents

Advertisement

Hardware Manual

Installation and Operation

To decrease the risk of damage to the equipment, you must obey the precautions that follow.
DANGER: General Hazard Warning!
This product can produce high forces and move at velocities that could cause injury.
The user is responsible for its safe operation. The following general equation is
provided to assist with risk assessments in regards to contact and pinch points:
WARNING: General Hazard Warning!
Only trained operators should operate this equipment.
l
All service and maintenance must be done by approved personnel.
l
Use this product only in environments and operating conditions that are approved in
l
this manual.
Never install or operate equipment that appears to be damaged.
l
Make sure that the product is securely mounted before you operate it.
l
Use care when you move the ANT130LZ or you could negatively affect the per-
l
formance of it.
WARNING: Trip Hazard!
Route, house, and secure all cables, duct work, air, or water lines. Failure to do so could
introduce trip hazards around the system that could result in physical injury or could
damage the equipment.
www.aerotech.com
ANT130LZ
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ant130lz-035Ant130lz-060

Table of Contents