Hardware Manual
Tightening torque values for the mounting hardware are dependent on the properties of the surface
to which the stage is being mounted. Values provided in
accurate for your mounting surface. Refer to
Table 2-2:
Stage to Mounting Surface Hardware
Mounting Hardware
M6 x 0.7 SHCS
Figure 2-2:
Mounting Hole Pattern (and Pneumatics Cylinder Clearance)
www.aerotech.com
Table 2-2
are typical values and may not be
Section 2.1.
for mounting locations and dimensions.
ANT130LZ
Typical Screw Torque
7.0 N·m [61 lb·in]
23