Altronix Trove2AG2 Installation Manual page 5

TAM2: Configuration of Altronix Power Supply and/or Sub-Assembly Boards and
1. Fasten standoffs (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards
(Fig. 3, 3a, pg. 5). Fasten metal standoffs in the correct locations to provide proper grounding, see below (Fig. 3, pg. 5).
2. Mount boards to standoffs utilizing 5/16" pan head screws (provided) (Fig. 3, pg. 5).
3. Align the AMAG boards on the backplane to match the boards' mounting holes with pems provided.
4. Fasten standoffs (provided) to pems that match the hole pattern for AMAG M2150 boards.
5. Mount AMAG boards to standoffs utilizing 5/16" pan head screws (provided) (Fig. 3, pg. 5).
Note: AMAG M2150 boards have specific markings. Please orient boards in the appropriate position according to the Fig. 3 below.
6. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Boards
eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB, ACM8/ACM8CB, ACMS8/ACMS8CB or PoE201
LINQ8PD/ LINQ8PDCB, ACM4/ACM4CB, MOM5, PD4UL/PD4ULCB, PD8UL/PD8ULCB, PDS8/PDS8CB, or VR6
AMAG M2150-AC24/4, M2150-4DC Boards
AMAG M2150-2DC Board
AMAG M2150-2DBC Board
AMAG M2150-4DBC, M2150-8DBC Boards
Fig. 3
A
Metal Standoff Placement
B
A
Metal Standoff Placement
A
B
Trove2AG2 / Trove2AM2 / Trove3AM3
AMAG M2150 Boards
C
READER 1
READER 1
D
F
E
COM C
RS232
Pem Mounting
Pem
Standoff
Power Supply or
Pan Head
Sub-Assembly
Screw
A
B
C
D
E
F
Fig. 3a
Backplane
- 5 -