Advertisement
GSC3574/3575 SETUP
7" Touch screen
6-Pin connector (J1)
Micro SD (J3)
Kensington Lock
Reset
USB Port (J5)
DEVICE INSTALLATION
The GSC3574/3575 can be mounted on the wall, the glass, or on the desktop
using a 20 ° bracket . Please refer to the following steps for installation:
On-Wall 0° Mount
1. Drill six holes on the wall referring to the positions
of the ones on the 0° installation bracket, then put
the screw anchors on the position of the holes.
2. Fix the 0° installation bracket on the wall by the
self-tapping screws on the positions defined.
3. Make sure the 0° installation bracket is installed
properly as shown in the illustration.
4. Plug in the cables to the proper GSC3574/3575
ports on the back, and fix the 0° installation brack-
et with the GSC3575/74 device using the two fixa-
tion screws from the bottom of the device.
5. Align the position slots on device's back with their
correct placement on the metal bracket, then fix it
by pushing down.
5
LED indicator
13-Pin connector (J2)
PoE Port (J4)
4
~3~
On-Wall 20° Mount
1. Drill six holes on the wall referring to the positions of
the ones on the 20° installation bracket, then put the
screw anchors on the position of the holes.
2. Fix the 20° installation bracket on the wall by the
self-tapping screws on the positions defined.
3. Make sure the 20° installation bracket is installed
properly as shown in the illustration.
4. Plug in the cables to the proper GSC3574/75 ports
on the back, and fix the 20° installation bracket
with the GSC3575/74 device using the two fixation
screws from the bottom of the device.
5. Align the position slots on device's back with their
correct placement on the 20° installation bracket,
then fix it by pushing down.
1
On-Wall Glass Adhesive Mount
1. Clean the glass before installation
2. Stick the Glass Adhesive tape to the 20° installation
bracket.
3. Install the 20° installation bracket with its glass adhe-
2
sive tape on the glass.
4. After installing with double-sided adhesive, please
use additional adhesive to fix the equipment.
5. Plug in the cables to the proper GSC3574/75 ports
on the back, and fix the 20° installation bracket with
3
the GSC3575/74 device.
6.
Align the position slots on device's back with their
correct placement on the 20° installation bracket,
then fix it by pushing down.
5
6
5
~4~
1
2
3
4
1
2
3
4
Advertisement
