Service Menu For Authorised Specialist; Menu Overview - Graf oneAdvanced Operation Manual

8

Service menu for authorised specialist

Configuring the parameters in the Service menu requires specific knowhow.

8.1 Menu overview

Service
Cycle settings
Pressure sensor
Information
Temperature sensor
Current measurements
Maintenance
Modules
Contactor monitoring
Exit menu
8. Service menu for authorised specialist
NOTE
The Service menu is intended for specialists only and is code
protected.
Do not attempt to edit any of the settings here. This may
otherwise prove detrimental to the plant's correct and reliable
operation.
Treatment system, PE, discharge class, starting times
T-settings
Output assignments
Valve size
Restart cycle
Level measuring
Pressure monitoring
Reset operating hours
Delete events
Define temperature thresholds
Define maximum/minimum currents for alarms
Organise maintenance
Configure dosing installations
Configure UV module
Compressor monitoring by means of external motor circuit
breakers
Exit and disable service level
59 / 137