ORIGINAL INSTRUCTIONS
10.3 DRAIN THE FUEL FROM THE CARBURETOR AGAIN
3
Tighten
2
1
1
(1). Turn the Fuel Cap Vent Lever to "ON" position.
(2).Turn the Fuel Tap to the "ON" position.
(3). Put the Drain Hose 1 into a suitable container.
(4). Loosen the Drain Screw 3 counterclockwise.
(5). Drain the gasoline from the Carburetor 2 into the container through
the Drain Hose 1.
(6). Tighten the Drain Screw 3 clockwise securely.
(7). Reinstall the Drain Hose 1 into the hole at the bottom casing.
(8). Reinstall the Maintenance Cover 4.
(9). Turn the Fuel Tap to the "OFF" position.
(10). Turn the Fuel Cap Vent Lever to "OFF" position.
- 79 -