Draining The Carburetor - Energizer eZG1300 User Manual

1000w gas powered
Hide thumbs Also See for eZG1300:
Table of Contents

Advertisement

Draining the Carburetor

1. Turn OFF the engine. Let Cool. Turn the fuel valve ON.
2. Position a container under the carburetor drain screw. Loosen the drain screw.
3. Allow fuel to drain completely drain and re-tighten the drain screw.
Note on Automatic Voltage Regulation (AVR)
Your generator is equipped with an Automatic Voltage Regulator which ensures a con-
stant voltage and present a waveform similar to what you get from the city power grid.
They are an improvement over basic generators but not as effective at safely running
sensitive electronics as our inverter generators, which can produce almost perfect sine
waveforms.
Therefore powering some sensitive electronics with this generator is not recommended,
since it will risk damage the electrical componentry and can cause a risk of damage.
27
series

Advertisement

Table of Contents
loading

Table of Contents