Table of Contents
Advertisement
2
Loosen
(1). Open the Oil Maintenance Cover 1.
(2). Remove the Oil Cap 2 and wipe the Dipstick 3 clean.
(3). Check the oil level by inserting the Dipstick 3 into the filler neck
without screwing it in.
(4). If the wet line on the Dipstick 3 is between "L" position and "H"
position, the oil level is OK. If the oil cannot reach "L" position, the oil
level is too low. Fill to the upper limit of the oil filler neck with the
recommended oil.
(5). Tighten the Oil Cap 2 and reinstall the Oil Maintenance Cover 1.
(6). Check generator for oil leakage.
NOTE
⚫
Make certain the generator is on a flat, level surface when
check the engine oil.
⚫
Engine oil quantity: 0.35L.
⚫
The engine is equipped with a low oil sensor that will stop the
engine automatically when the oil level falls below a critical
threshold.
1
3
- 40 -
ORIGINAL INSTRUCTIONS
H
L
Advertisement
Table of Contents
