Table of Contents
Advertisement
ORIGINAL INSTRUCTIONS
(3). 12V DC Receptacle: Connection for re-charging 12V DC
automotive-style batteries while generator is in operation.
(4). 12V DC Circuit Breaker: Overload protection for the 12VDC
charging system.
(5). USB Plug: USB Output receptacles for connecting 5VDC devices.
(6). Ground (Earth) Terminal: Grounding point for the generator.
(7). Engine Switch: This switch turns ON or OFF engine ignition
system.
(8). ECO Switch: Turning on this switch can slows the engine speed
when the load is reduced to save fuel, lessen noise and engine wear.
(9). Reset Button: This switch can be used to recover output of the
generator under the condition of overload protection, and unnecessary
to restart engine overall.
(10). Start Button (optional): This switch can be used to start the engine
equipped with electric starter (optional equipment).
(11). READY LED (green): READY LED light comes ON when the
generator is operating normally. It indicates that the generator is
producing electrical power at the receptacles.
(12). OVERLOAD LED (red): If the generator is overloaded, or if there
is a short circuit at AC receptacles, the overload LED light (red) will go
ON, and current to the connected appliance(s) will shut off in a few
seconds.
(13). LOW OIL LEVEL LED (yellow): Lights up when oil level is below
safe operating level, and the engine shuts down automatically. Unless
- 33 -
Advertisement
Table of Contents
