Energizer EZG2001i Original Instructions Manual page 60

Hide thumbs Also See for EZG2001i:
Table of Contents

Advertisement

(6). Charging time will vary with battery size and condition.
Circuit Breaker 6 does not prevent over-charging a battery.
NOTE
The 12V DC Receptacle should ONLY be used for charging 12V
automotive type batteries. The 12V DC output is unregulated
and will damage other 12V DC products.
When using the 12V DC output, turn the ECO Switch to the
"OFF" position.
NEVER reverse the polarity when connecting the battery
terminals to the charging jack. Severe damage may occur to
the generator and battery.
Do not start the vehicle while the battery charging cable is
connected and the generator is running. The vehicle or the
generator may be damaged.
An overloaded DC circuit or a wiring problem will trip the DC
Circuit Breaker 6(PUSH button extends out). If this happens,
wait a few minutes before pushing in the DC Circuit Breaker 6
to resume operation. If the DC Circuit Breaker 6 continues to
go OFF, discontinue charging and contact your authorized
generator dealer.
- 60 -
ORIGINAL INSTRUCTIONS
The DC

Advertisement

Table of Contents
loading

Table of Contents