Table of Contents
Advertisement
Simrad Echo sounder system Instruction manual
Calibrating the current
velocity measurements
Topics
Recording raw data, page 28
Collecting data for current indicator calibration, page 29
Processing data for current indicator calibration, page 33
Recording raw data
Use the raw data recording functionality provided by the echo sounder system to save
echo data using the
format. The data files can be copied or moved to an external
*.raw
storage device, or to another computer on the network. The recording is controlled
by the
function.
Record
Prerequisites
Before you start data recording, make sure that you have defined where to store the files.
To define which disks and folders to use to save the data files, use the
page.
File Setup
The
page is located in the
dialog box. If you wish to save your recorded
File Setup
Output
data on an external hard disk, make sure that it is connected to the Processor Unit.
Note
You need a dedicated software license to record raw data. The second software license
is time limited for this specific purpose.
Procedure
1
Open the
menu.
Operation
28
110-0002398/A
Advertisement
Table of Contents
