Edit Current Region - Kongsberg AI71 Instruction Manual

Simrad AI71/AI70 Automatic Identification System
74
ChA: The radio channel to be used as channel A.
ChB: The radio channel to be used as channel B.
RxTx: Transmission/reception mode. This parametre indicates
whether or not the AIS should transmit and receive on both
channels, or on only a subset of these.
TxPower: The transmission power of the radio. Low equals
2W, and High equals 12W.
Lat/Lon: The rectangular area to which the radio parametres
apply. The area is spesified by entering the coordinates for the
north-east corner and the south-west corner.
BW A: Bandwidth for the selected channel A.
BW B: Bandwidth for the selected channel B.
Zone: Transition zone for the region. This parametre is given in
nautical miles, and provides information about the transition
zone of the region in which the AIS should change radio
parametres to the ones spesified for the region.

Edit Current Region

This function is used to change the current radio parametres and
is similar to Add Region, the only difference being that by
changing these values the default parametres for the current
region are altered and take effect immediately.
Man_instr_ai71_ai70_r1