Appendix > Character Entry Method
Keys
Characters (Each press of a key changes the character in the order from left to right.)
w
x
9 (During number entry)
.
,
0 (During number entry)
Select to change the character in the cursor position between upper case and lower case.
"*" or "." (During number entry)
!
"
<
=
# (During number entry)
*
Depending on the functions, there are symbols that cannot be entered.
Entering Symbols
Symbols can be entered.
1
Select the [#] key. Displays the symbol list.
2
Select the [ ], [ ], [ ] or [ ] key to move the cursor and select the symbol to be entered.
3
Select the [OK] key. The selected symbol is entered.
Entering Characters
Follow the steps shown below to enter "R&D" for example.
1
Select the [7] key three times. [r] is entered.
y
z
W
X
Y
-
_
'
!
?
#
$
%
&
'
>
?
@
[
\
Z
9
(Repeats from the first character on the left)
(space)
0
(Repeats from the first character on the left)
(
)
*
+
,
]
^
_
`
{
11-12
-
.
/
:
;
|
}
~
Displays the
symbol list. For
details, refer to
the following:
Entering
Symbols
(page 11-11)