Electrical Connection: Other Countries - Miele DGC 7150 Operating And Installation Instructions

Combination steam oven
This combination steam oven is
supplied with an approx. 1.5 m long 3-
core cable for connection to a 230 V,
50 Hz supply.

WARNING - THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD).
Maximum connected load: see data
plate.
Electrical connection: Other
countries
All electrical work should be carried out
by a suitably qualified and competent
Miele approved service technician in
strict accordance with local and
national safety regulations.
Connection should be made via a fused
connection unit or a suitable isolator,
which complies with national and local
safety regulations, and the on/off switch
should be easily accessible after the
appliance has been installed.
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
Switches with a minimum all-pole
contact gap of 3 mm are suitable for
isolating the appliance. These include
circuit breakers, fuses and protective
devices.
The voltage and rated load are given on
the data plate situated at the front of
the combination steam oven interior.
Please ensure that these match the
household mains supply.
For extra safety it is advisable to install
a suitable residual current device
(RCD) / ground fault interrupter (GFI).
Contact a qualified electrician for
advice.
If the cord is damaged a new cord must
be fitted by a Miele approved service
technician.

WARNING - THIS APPLIANCE
MUST BE EARTHED
Hong Kong
This appliance is supplied with a power
cord with plug for connection to a
230 V, 50 Hz socket outlet.
Taiwan
This appliance is supplied with a power
cord with plug for connection to a
220 V, 60 Hz socket outlet.
Installation
107