Huawei UPS5000-E-30 kVA User Manual page 129

UPS5000-E-(30 kVA–180 kVA)
User Manual (Integrated UPS)
Item
Shallow Dis. Test
Capacity Test
USB Operations
You can export Fault Data, and perform Export Config., Upgrade Software, BSP
Upgrade, and Import Config. on USB Operations.
Figure 4-45 USB Operations
Starting or Shutting Down the Inverter
Item
Inv. ON
Inv. OFF
ECM Switchover
● Only professional personnel are allowed to use this function.
● Clear faults before performing ECM switchover.
● After an ECM is inserted, switchover is supported only after the ECM is
Issue 02 (2022-12-30)
NO TICE
configured and starts working properly (about 30 seconds).
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
This item allows you to partially discharge
batteries. A shallow discharge test is conducted to
test the battery loop reliability and short-time
discharge capacity when the batteries have not
been discharged for a long time.
This item allows you to fully discharge batteries. A
deep discharge test is conducted to obtain the
battery discharge performance data.
Description
Allows you to start the inverter manually.
Allows you to shut down the inverter manually.
4 LCD Interface
121