Deployment Wizard - Huawei LUNA2000-200KWH-2H1 Quick Manual

7. Choose Monitoring > ESU > Running Info., and click
and wait for 2 minutes.
8. Choose Monitoring > ESM and check
alarm is generated.
8.5

Deployment Wizard

Click Deployment Wizard and set parameters as prompted. Click Skip for unused devices.
• Set basic parameters.
• After devices are connected, click Search for Device. After the search is complete, click
to check the search result.
•
Connect to a power meter, and set Meter usage to Export+import meter.
•
Connect to EMIs.
• Set the battery working mode to Maximum self-consumption or TOU.
Parameter Description
It is applicable to the PV+ESS system to increase the self-consumption rate of
Maximum self- PV power. If the PV power is greater than the load power, the excess PV
consumption power is stored in the ESS. If the PV power is less than the load power, the
ESS is discharged.
It is applicable to the PV+ESS system and ESS-only system where peak to
TOU valley electricity prices are different. The ESS can be charged during valley or
shoulder hours and discharged based on loads during peak hours.
a. Set the battery working mode to Maximum self-consumption.
in the upper right corner,
in the upper right corner to ensure that no major
43